Dell 4220 User Manual page 50

Reset items include both computer sources and Video source settings.
LAN S —
Select and press
ETTINGS
menu provides the following options:
WIRELESS AND LAN—
function.
DHCP—
If a DHCP server exists in the network to which the projector is
connected, the IP address will automatically be acquired when you select
DHCP On. If DHCP is Off, manually set the IP Address, Subnet Mask,
and Gateway. Use
Mask, and Gateway. Key in enter to confirm each number and then use
and to set the next item.
IP A —
DDRESS
projector connected to the network.
S M
UBNET ASK
G —
Check the Gateway address with your network/system
ATEWAY
administrator if you configure it manually.
DNS—
Check the DNS Server IP address with your network/system
administrator if you configure it manually.
S —
Press
TORE
settings.
NOTE:
1. Use
Gateway, DNS, and Store.
2. Press the
DNS to set the value. (The selected option is highlighted in blue)
a
b
50 Using Your Projector
to activate LAN settings. The LAN settings
Select Enabled to active the Wireless and LAN
and to select the number of IP address, Subnet
Automatically or manually assigns the IP address to the
—
Configure the Subnet Mask of the network connection.
to save the changes made in network configuration
buttons to select IP Address, Subnet Mask,
and
button to enter IP Address, Subnet Mask, Gateway, or
Use and buttons to select the option.
Use and buttons to set the value.
http://www.pureglare.com.au