Dell 4220 User Manual page 32

4
Up / Keystone
adjustment
5
Right / Auto Adjust
6
IR Receiver
7 Down / Keystone
adjustment
8
Menu
9
Left / Source
10 Enter
32 Using Your Projector
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-35 degrees).
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to synchronize the projector to the input
source.
NOTE:
Auto Adjust does not operate if the
on-screen display (OSD) is displayed.
Point the remote control towards the IR receiver
and press a button.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-35 degrees).
Press to activate the OSD. Use the directional
keys and the Menu button to navigate through
the OSD.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to toggle through Analog RGB, Composite,
Component (YPbPr via VGA), HDMI, and
S-Video sources when multiple sources are
connected to the projector.
Press to confirm the selection item.
http://www.pureglare.com.au