Dell 4220 User Manual page 46

D S (
ISPLAY ETTINGS IN
settings. The display settings menu provides the following options:
A R
SPECT ATIO
image appears. Options are: Origin, 16:9, and 4:3.
•Origin — Select Origin to maintain the aspect ratio of image projector
according to the input source.
•16:9 — The input source scales to fit the width of the screen to project a
16:9 screen image.
•4:3 — The input source scales to fit the screen and projects a 4:3 image.
Z —
Press
OOM
3D D —
ISPLAY
NOTE:
1. When you want to create a 3D experience, you will need a few other
components including:
a
b
c
d
46 Using Your Projector
V M )—
Select and press
IDEO ODE
—
Allows you to select the aspect ratio to adjust how the
and to zoom and view the image.
Adjust the image scale by pressing
and press
only.
Z N
OOM AVIGATION
Navigation menu.
Use
Select On to start the 3D display function (default is Off).
Computer/Laptop with a 120 Hz signal output quad-buffered
graphics card.
"Active" 3D glasses with DLP Link™.
3D content. See "Note 4".
3D Player. (Example: Stereoscopic Player...)
http://www.pureglare.com.au
to activate display
to view on your remote control
—Press to activate the Zoom
to navigate the projection screen.
or