Troubleshooting - Suzuki GSX250F Owner's Manual

HEAQLlGHT BEAM ADJUSTMENT
The headlight beam can be ad-
justed both horizontally and verti-
cally if necessary.
"
TIl
Mjust the Beam Vertic!ll!y:
Turn 'the adjuster
CD
clockwise or
counterclockwise. '
To Adjust the Beam Horizontally:
Turn the adjuster
CV
clockwise or
counterclockwise.
54
FUSES
The fuses are located beside' thEj
battery. They are gesigned to open.
when a circuit overload Elxi;>tsin
individual electrical system cir-
cuits. If any electrical system fails
to operate, then the fuses must bEl
checked. Spare fuses are proviqElq
inside the fuse box cover.
ACAUTION
• Never use the fuse other than
25A or 10A. ' " '.
• Always be sure to replace thll
blown fuse with the correct am-
perage fuse. Never use a su~sti-
tute, for example, aluminum foil
or a wire to replace a blown fus,ll.
• If a fuse blown out in a short
period of time. it means that you
could have a major electrical
problem. You should consult your
authorized Suzuki dealer or quali-
fied mechanic immediately.
FUSE LIST
• 25A MAIN fuse protects all elec-
trical system.
• 10A HEAD fuse protects the
headlight and high beam indica-
tor light.
• 10A SIGNAL fuse protects the
turn signal light, turn signal indi-
cator light, position light, tail/
brake light, instrument panel
light, neutral indicator light, oil
pressure indicator light, fuel lev-
el indicator light and horn.
• 10A IGNITION fuse protects the
ignition system and fan motor.
TROUBLESHOOTING
NOTE: It is best to consult your
Suzuki dealer before attempting to
troubleshoot any problem. If the
machine is still within the warra,nty
then the Suzuki dealer should be
consulted before any repairs are
attempted on the machine by your-
self. Tampering with the machine
while in warranty may affect war-
ranty consideration.
If the engine refuses to start, per-
form the following inspections to
determine the cause.
FUEl SUPPLY CHECK
1. Make sure there is enough fuel
in the fuel tank.
2. Make sure there is enough fuel
reaching the carburetor trom
the fuel valve.
a. Turn the fuel valve to the
"OFF" position.
AWARNING
Do not allow the fuel to spill. Catch
the fuel in a container. Do not allow
any fuel to come in contact with the
hot engine or exhaust system. Extin-
guish any smoking materials before
performing this check, and stay
away from any other fire or heat
source.
b. Loosen the drain screw lo-
cated under the carburetor.
Drain the fuel from the carbu-
retor into a container.
c. Tighten the drain screw.
55