Light Bulb - Suzuki GSX250F Owner's Manual

LIGHT BULB
H~PLAcEMENT
The wattage ra!Jfig of each bulb is
shown on the;~Ehart below. When
replacing a btJrned out bulb, al-
ways use the exact same wattage
rating. Using other than the speci-
fied rating can result in overload-
ing the electrical system or prema-
ture failure of a bulb.
Headlight 12V 60/55W 12V 21W 12V 5/21W
HEADLIGHT
To replace the headlight bulb, fol-
low the procedure below:
1. Disconnect socket
CD
from the
headlight and remove the rub-
ber cap
CV.
52
2. Unhook the bulb holder spring
®,
and pull out bulb
(1).
ACAUTION
This motorcycle uses. a halogen
headlight bulb.
00
not touch the
glass bulb. or the life of the bulb
will be shortened.
TAIl/BRAKE LIGHT
To replace the tail/brake light bulb,
follow the procedure below:
2. Push in on the bulb, turn it to the
left. and pull it out.
53
TURN SIGNAL LIGHT """"-
To replace the license plate light ~
bulb, follow the procedure below:
2. Push in on the bulb, turn it to the
left, and pull it out.