Volvo 2015 S60 Owner's Manual page 352

09 Maintenance and specifications
Replacing bulbs
09
NOTE
Before starting to replace a bulb, see
page 348.
1. Loosen the cover's four retaining screws
(3-4 turns) with a Torx T20 tool (1). The
screws should not be removed com-
pletely.
2. Push the cover to the side.
3. Remove the cover.
Reinstall the cover in the reverse order.
Low beam, Halogen
350
1. Remove the headlight housing from the
vehicle (see page 348).
2. Remove the cover over the bulbs (see
page 349).
3. Unplug the connector from the bulb.
4. Remove the bulb by pulling it straight out.
5. The guide lug on the new bulb should be
straight up when the bulb is inserted into
the holder and the bulb should snap into
place.
6. Put the cover back into position and rein-
stall the headlight housing.
High beam, Halogen
1. Remove the headlight housing from the
vehicle (see page 348).
2. Remove the cover over the bulbs (see
page 349).
3. Remove the bulb by turning it counter-
clockwise and pulling it straight out.
4. Remove the connector from the bulb.
5. Press the new bulb into the socket and
turn it clockwise to put it in place. It can
only be secured in one position.
6. Reinsert the bulb holder into the headlight
housing.
7. Put the cover back into position and rein-
stall the headlight housing.