Volvo 2015 S60 Owner's Manual page 209

Activating/deactivating BLIS
Button for activating/deactivating BLIS
BLIS can be deactivated/reactivated by
pressing the button on the center console.
The number or combinations of options on
the vehicle may not leave a space available
on the center console for the BLIS button. If
this is the case, BLIS can be deactivated/
reactivated in the MY CAR menu system (see
page 215)
•
Select Off or On in Settings
settings BLIS.
When BLIS is deactivated/reactivated, the
indicator lights will go out/illuminate (the indi-
cators will also flash once when the function
is reactivated) and a message will appear in
the instrument panel.
To erase the message:
•
Press the OK button on the left steering
wheel lever
or
•
Wait for approx. 5 seconds for the mes-
sage to disappear
When does BLIS function
Zone 1. Blind area, Zone 2. Area for passing
vehicles
Car
The system functions when your vehicle is
moving at speeds above 6 mph (10 km/h).
BLIS is designed to react to:
•
Other vehicles in your door mirrors' "blind
area"
•
Vehicles that are passing your vehicle
04 Driver support
Blind Spot Information System (BLIS)*
When BLIS detects a vehicle in zone 1 or a
passing vehicle in zone 2, the indicator light in
the door panel will glow steadily. If the driver
then uses the turn signal on the side on which
the warning is given, the indicator light will
flash and become brighter.
WARNING
•
BLIS does not function in sharp
curves.
•
BLIS does not function when your
vehicle is backing up.
Cross Traffic Alert (CTA)
On vehicles equipped with the optional Park
assist system (see page 194), Cross Traffic
Alert (CTA) can be deactivated/reactivated by
pressing the Park assist button on the center
console. The BLIS indicator lights on the front
doors will flash when CTA is reactivated by
pressing the button.
*
Option/accessory, for more information, see Introduction.
04
}}
207