Table of Contents
Advertisement
Onboard Serial Port 2
Auto
BIOS will automatically setup the port 2 address.
3F8/IRQ4
Enable onboard Serial port 2 and address is 3F8.
2F8/IRQ3
Enable onboard Serial port 2 and address is 2F8. (Default Value)
3E8/IRQ4
Enable onboard Serial port 2 and address is 3E8.
2E8/IRQ3
Enable onboard Serial port 2 and address is 2E8.
Disabled
Disable onboard Serial port 2.
UART Mode Select
(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
ASKIR
Set onboard I/O chip UART to ASKIR Mode.
IrDA
Set onboard I/O chip UART to IrDA Mode.
SCR
Set onboard I/O chip UART to SCR Mode.
Normal
Set onboard I/O chip UART to Normal Mode. (Default Value)
RxD, TxD Active
Hi, Hi
Set RxD,TxD Active to Hi, Hi.
Hi, Lo
Set RxD,TxD Active to Hi, Lo. (Default Value)
Lo, Hi
Set RxD,TxD Active to Lo, Hi.
Lo, Lo
Set RxD,TxD Active to Lo, Lo.
IR Transmission Delay
Enabled
Enabled IR Transmission delay. (Default Value)
Disabled
Enabled IR Transmission delay.
UR2 Duplex Mode
Half
IR Function Duplex Half. (Default Value)
Full
IR Function Duplex Full.
3 7
BIOS Setup
Advertisement
Table of Contents
