Onboard Serial Port 1; Onboard Serial Port 2; Onboard Parallel Port - Gigabyte GA·7VRX User Manual

?Onboard Serial Port 1

?Auto
?3F8/COM1
?2F8/COM2
?3E8/COM3 Enable onboard Serial port 1 and address is 3E8.
?2E8/COM4 Enable onboard Serial port 1 and address is 2E8.
?Disabled

?Onboard Serial Port 2

?Auto
?3F8/COM1
?2F8/COM2
?3E8/COM3 Enable onboard Serial port 2 and address is 3E8.
?2E8/COM4 Enable onboard Serial port 2 and address is 2E8.
?Disabled
?Serial Port 2 Mode
?Normal
?IrDA
?ASK IR
?SCR
SCR option is shown only when there's SCR hardware function is installed.

?OnBoard Parallel port

?378
?278
?3BC
?Auto
?Disabled
BIOS will automatically setup the port 1 address (Default Value).
Enable onboard Serial port 1 and address is 3F8.
Enable onboard Serial port 1 and address is 2F8.
Disable onboard Serial port 1.
BIOS will automatically setup the port 2 address (Default Value).
Enable onboard Serial port 2 and address is 3F8.
Enable onboard Serial port 2 and address is 2F8.
Disable onboard Serial port 2.
Normal operation. (Default Value)
Onboard I/O chip supports IrDA
Onboard I/O chip supports ASK IR.
Onboard I/O chip supports SCR.
Enable On Board LPT port and address is 378.
Enable On Board LPT port and address is 278.
Enable On Board LPT port and address is 3BC.
Set On Board LPT port is Auto. (Default Value)
Disable On Board LPT port.
47
BIOS Setup