Table of Contents
Advertisement
Change of Access Number
The factory default is
"11111".
Changing the access number of the
administrator of 6-3 Configuring the
Machine with Tools Mode
Screen Layout
Configuring a screen (default/basic/
customised) of 6-3 Configuring the
Machine with Tools Mode
Item
Default screen
Basic Features screen
Customised Features
screen
You can change the access number of the System Administrator. The
access number must be in numeric values between 4 to 12 digits. To
change the access number, use the keypad to enter the new access
number twice, and select Enter.
This feature allows you to customise the default screen, Basic Features
screen, and the Customised Features screen.
Description
Change the default screen that is displayed when the power
is switched on, when it returns from the power saver mode,
or when Clear All is pressed.
•
Configuring a screen (default/basic/customised) in 6-3
Configuring the Machine with Using Tools Mode
Define the number of features to be displayed on the Basic
Features screen. These features are each allocated to their
respective basic buttons.
Display 2 Features
Assign the features to the two buttons (Feature Buttons
1 and 2)
Display 3 Features*
Assign the features to Feature Button 1, Feature Button
2, and Feature Button 3.
Display 4 Features
Assign the features to Feature Button 1, Feature
Button 2, Feature Button 3, and Feature Button 4.
•
Configuring a screen (default/basic/customised) in 6-3
Configuring the Machine with Using Tools Mode
Assign the features to be displayed on the buttons of the
Customised Features screen. You can display a maximum
of eight feature buttons on the Customised Features screen.
•
Configuring a screen (default/basic/customised) in 6-3
Configuring the Machine with Using Tools Mode
Custom Presets
Available Options
Basic Features,*
Customised Features,
Features Menu,
Stored Jobs
* indicates the factory default.
6-1 List of Custom Preset Functions
6
145
Advertisement
Table of Contents
