Canon PowerShot G9 User Manual page 138

1361
Advanced Shooting Functions
I
Switching between Metering Modes
~
~ See Functions Available in Each Shooting Mode (p. 270).
-S:qooting
M~;··ijlj(t)
SCN-
d;I_~-P-Tv ~V
M]
Appropriate for standard shooting conditions,
including backlit scenes. The camera divides
til
images into several zones for metering. It
Evaluative evaluates complex lighting conditions, such as the
position of the subject, the brightness, the direct
light, and the backlighting, and adjusts the settings
to the correct exposure for the main subject.
[iJ
Center Weighted
Averages the light metered from the entire frame,
but gives greater weight to the subject matter at
Average
the center.
Spot AE Point Meters the area within the spot AE point frame.
Center
Locks the spot metering frame to the center of the
[I]
LCD monitor.
Move the spot AE point to the same position as
AF Point the selected AF frame. Can be set only in
[FlexiZone] (p.
116).
1
Change a metering mode.
1. Press the
@
button.
2. Use the
-+
or
+
button to select
til
and use the .. or
+
button to
change a metering mode.
3.
PreSS the
@
button.
1361
Advanced Shooting Functions
I
Switching between Metering Modes
~
~ See Functions Available in Each Shooting Mode (p. 270).
-S:qooting
M~;··ijlj(t)
SCN-
d;I_~-P-Tv ~V
M]
Appropriate for standard shooting conditions,
including backlit scenes. The camera divides
til
images into several zones for metering. It
Evaluative evaluates complex lighting conditions, such as the
position of the subject, the brightness, the direct
light, and the backlighting, and adjusts the settings
to the correct exposure for the main subject.
[iJ
Center Weighted
Averages the light metered from the entire frame,
but gives greater weight to the subject matter at
Average
the center.
Spot AE Point Meters the area within the spot AE point frame.
Center
Locks the spot metering frame to the center of the
[I]
LCD monitor.
Move the spot AE point to the same position as
AF Point the selected AF frame. Can be set only in
[FlexiZone] (p.
116).
1
Change a metering mode.
1. Press the
@
button.
2. Use the
-+
or
+
button to select
til
and use the .. or
+
button to
change a metering mode.
3.
PreSS the
@
button.