Unloading The Nailer - Campbell Hausfeld IronForce IFN2190 Instruction Manual

Unloading the Nailer

22
3. Load strips of fasteners into the
magazine slot. Make sure that the
nails are placed into tool at the
proper orientation. (fig.11)
Figure 11 - Loading fasteners
4. Squeeze the pusher and the latch together to unlatch pusher. Make
sure the head of the last nail is under the head of the pusher.
1. Always unload all fasteners before removing tool from service.
Unloading is the reverse of loading except always disconnect the air
hose before unloading.
2. Pull nail pusher mechanism back until pusher engages with
magazine latch.