Optional Accessories; Interface Box (Supplied) - Sony F35 Operation Manual

Input/output connectors
DC IN LEMO 8-pin male (1), DC 10.5 to 17 V,
20 to 30 V
DC OUT 12 V: 11-pin (1), DC 12 V, 4 A
maximum
24 V: 3-pin (1), DC 24 V, 5.5 A
maximum
(The usable current may be limited
depending on the load and input
conditions.)
VF1, VF2 20-pin (1 each)
LENS 12-pin (1)
TEST OUT BNC type (1), VBS/HD Y
75 ohms, 1.0 Vp-p
MONITOR OUT HD SDI
4:2:2, BNC type (2), HD-SDI signal,
BTA-S004A-compliant, 75 ohms,
0.8 Vp-p, 1.485 Gbps
GENLOCK IN BNC type (1),75 ohms, SMPTE 274M
HD 3-level sync, 0.6 Vp-p
REMOTE 8-pin (1)
EXT I/O LEMO 5-pin, female (1)
(network) RJ-45 type (1), 10BASE-T, 100BASE-
TX
Lens mount hot shoe
4-pin (2), conforming to ARRI LDS
(Lens Data System) and Cooke /i
Intelligent Electronic Lens System
Supplied accessories
Interface box (1)
Assistant panel (1)
Assistant panel cable (1)
Assistant panel hanger (1)
+B4×8 screws (4)
Center handle (1)
L handle (1)
Riser plate (1)
Power cable connector (LEMO 8-pin) (1)
Operation manual (1)
CvpFileEditor CD-ROM (1)

Interface Box (Supplied)

General
Power requirements
DC 10.5 to 17 V
Operating temperature
0°C to +40°C (32°F to 104°F)
Storage temperature
−20°C to +60°C (−4°F to +140°F)
Dimensions 138 × 104 × 79 mm
(5
Mass Approx. 560 g (1 lb 4 oz)
138
Specifications
1 1 1
/ × 4 / × 3 / inches)
2 8 8
Input/output connectors
AUDIO IN CH1, CH2
XLR 3-pin, female (1 each)
AUDIO switch in MIC: −44 dBu,
balanced
AUDIO switch in LINE: +4 dBu,
balanced
Phantom +48V
DC IN XLR type, 4-pin, male (1)
HD SDI OUT A/B
BNC type (1 each), Dual Link, HD-SDI
signal, BTA-S004A-compliant,
75 ohms, 0.8 Vp-p, 1.485 Gbps

Optional Accessories

HD Electronic Viewfinder
HDVF-C30WR (3-inch type, color)
Optical Fiber Camera Adapter
CA-F101
Remote Control Unit
RM-B750
Master Setup Unit
MSU-900/950
MSU-1000/1500
"Memory Stick"
Interface Box (additional)
For purchasing of an additional interface box, consult a
Sony sales personnel.
Design and specifications are subject to change without
notice.
Note
Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF
THIS UNIT, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.