Finding A Good Location; Description Of Your Hazard Alert Radio - Radio Shack 12-262 User Manual

For the best reception, place your Hazard Alert Radio on a flat surface where
alert signals and you can hear the weather broadcast.
ability to receive a broadcast, do not place Hazard Alert Radio near any large obstructions or
metal surfaces such as a refrigerator, a metal cabinet, etc.

description of your Hazard Alert Radio

ALERTS
While an alert is in effect, the corresponding
alert LED indicator flashes for 60 seconds and
then lights for the duration of time the alert
is in effect. Red - Warning, Orange - Watch,
Yellow - Advisory and Green - Ready.
Set Clock and Alarm

To set clock, press and
hold the CLOCK button to
enter setup mode. To set
alarm press CLOCK until É
flashes, then press and hold
CLOCK to enter alarm setup.

Press  or  to select
minute or hour, the selected
digit flashes.

Press  or  to change
the digits.

Press  after setting
the time to confirm your
selection and exit. A beep
sounds.
WEATHER/SNOOZE
Press to listen to the
broadcast, stop alarm, or
activate snooze when the
alarm sounds.


finding a good location

To improve the Hazard Alert Radio's
flip-up display
Shows the radio's menu
choices. Lift to change angle.
MENU/SELECT and Arrow
Keys
Press to choose menu items
and confirm your selection.
The arrow keys  /  / /
 allow you to navigate the
programming menu and
adjust the volume.
it can receive