Dish Network HDTV User Manual page 51

Event Timer Frequencies
- Applies to a one-time program. If the program time changes, this
Once
timer operates at the new time. The receiver deletes this timer after the timer
operates.
Weekly - Applies to a program that is scheduled for once a week on the
same channel at the same time on the same day.
Applies to a program that is scheduled for Monday through Sunday
Daily -
on the same channel at the same time each day.
- Applies to a program that is scheduled for Monday through
Mon.-Fri.
Friday on the same channel at the same time each day.
Before an Event Timer Operates
Five minutes before an event timer operates, the receiver displays a small
blinking "clock" symbol on the TV screen. This symbol disappears when
the program begins. While the symbol is displayed, you may do either one
of the following:
Press the remote control CANCEL button to clear the symbol
•
from the TV screen. Pressing the CANCEL button does not
cancel the timer.
Press the remote control INFO button to display an overlay
•
on the screen where you can choose one of three options:
Select either the
event timer, or select
: This stops only this instance of a Mon.-Fri., Daily or Weekly
Note
timer. The timer will operate the next time it is scheduled. To stop all
operations of such a timer, you must delete the timer. For a Reminder
Event Timer, instead of having the option to stop the timer, you have the
option to tune to the program.
OK or the Cancel option to continue with the
to stop the event timer.
Stop Timer
Using Timers
Page 47