Toshiba SD-K740SU Owner's Manual page 19

To pause playback (still mode)
Press PAUSE/STEP during playback.
To stop playback
Press STOP.
STOP
Notes:
• If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV screen
according to the type of loaded disc. In this case, check your disc again (see pages 8 and 37).
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (ie. the wrong way up) and press the OPEN/CLOSE button or the PLAY
button on the unit, "Reading" will appear on the display for 30 seconds and then "Incorrect Disc" will continue to be displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 28.
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according
to the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may
cause the unit to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to
malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the
ON/STANDBY (I /
• There may be a slight delay between you pressing the button and the function activating.
2C01501A P18-20
Downloaded From Disc-Player.com Toshiba Manuals
To obtain a higher quality picture
POWER
Occasionally, some picture noise not usually visible during a normal broadcast
DVD
may appear on the TV screen while playing a DVD video disc because the high
OPEN/CLOSE
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this unit, you should generally reduce the
sharpness adjustment on your TV when viewing DVD video discs.
PLAY
About
DVD
The
DVD VCD
STOP
function described under that heading.
PAUSE/STEP
: You can use this function with DVD video discs.
DVD
: You can use this function with Video CDs.
VCD
ENTER
: You can use this function with Audio CDs and CD-R/RW CDs.
CD
C/D/B/A
To resume normal playback, press
PLAY.
• The sound is muted during still
mode.
) button on your remote control once the movie is completed.
19
VCD CD
icons on the heading bar show the playable discs for the
CD
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
Be sure to press OPEN/CLOSE to close the disc tray
after you remove the disc.
Screen saver function
The screen saver operates when you leave the unit in
DVD stop mode for appox. five minutes.
The screen will repeatedly get dark gradually and back
to normal.
12/16/03, 19:58
19