Connecting To An Amplifier Equipped With An Mpeg2 Audio Decoder; Connecting To An Amplifier Equipped With A Digital Audio Input - Toshiba SD-K740SU Owner's Manual

Warning
• When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo
jacks. To avoid possible damage to the audio system, you should take proper precautions when the AUDIO OUT (L/R) jacks
of the DVD video player are connected to an amplification system. (Do not leave the ANALOG AUDIO OUT (L/R) cables
dongling.) To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must
be connected to the OPTICAL DIGITAL AUDIO OUT jack or COAXIAL DIGITAL AUDIO OUT jack of the DVD video player.

Connecting to an amplifier equipped with an MPEG2 audio decoder

MPEG2 sound
You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with
an MPEG2 audio decoder or MPEG2 audio processor.

Connecting to an amplifier equipped with a digital audio input

2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and
speaker system (right and left front speakers).
Notes:
• DO NOT connect the OPTICAL DIGITAL AUDIO OUT jack or COAXIAL DIGITAL AUDIO OUT jack of the DVD video player
to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is
incompatible with the OPTICAL DIGITAL AUDIO OUT jack or COAXIAL DIGITAL AUDIO OUT jack of the DVD video player.
• Connect the OPTICAL DIGITAL AUDIO OUT jack or COAXIAL DIGITAL AUDIO OUT jack of the DVD video player to the
"OPTICAL" or "COAXIAL" input of a Receiver or Processor.
• Refer to the owner's manual of the connected equipment as well.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD video player's power cord. If you leave the amplifier power
on, the speakers may be damaged.
2C01501A P14-17
Downloaded From Disc-Player.com Toshiba Manuals
Amplifier equipped with an
MPEG2 audio decoder
To COAXIAL To OPTICAL
type digital type digital
audio input audio input
Amplifier equipped with
a digital audio input
To COAXIAL To OPTICAL
type digital type digital
audio input audio input
17
Optical digital cable (not supplied)
75 Ω coaxial cable (not supplied)
Optical digital cable (not supplied)
75 Ω coaxial cable (not supplied)
12/16/03, 19:58
OUT PUT
COMPONENT DIGITAL
Y
S-VIDEO
P L COAXIAL
B
OPTICAL AUDIO
P R
R VEDIO
Connect either.
OUT PUT
COMPONENT DIGITAL
Y
S-VIDEO
P L COAXIAL
B
OPTICAL AUDIO
P R VEDIO
R
Connect either.
17