Page 1
Author: John Lokker Tools used in this guide Phillips #2 Screwdriver This guide gives instructions on how to remove the spring connected to the disc drive front flap of the Toshiba SD-K740 DVD player. Step 1 — Top Panel Make sure the DVD player is unplugged before beginning.
Page 2
Installing Toshiba SD-K740 Front Flap Tray Door Spring Step 3 Flip the DVD player over onto it's front face. Remove the back panel by lifting up and pulling it towards yourself. Step 4 — Front Panel Flip the DVD player so its top is sitting on your working surface.
Page 3
Installing Toshiba SD-K740 Front Flap Tray Door Spring Step 6 Grasp the front panel and pull forward and to your right to remove. Step 7 — Front Flap Tray Door On back side of front panel very carefully apply pressure to the left hand side of the flap hinge.
Page 4
Installing Toshiba SD-K740 Front Flap Tray Door Spring Step 9 Remove the spring from the end of the right peg by pulling the door away from the spring. Do not pull away from the front panel until the spring has been removed from the flap.