Storing/Recalling Scanning Modes
With this function you can store up to nine settings, each setting consisting of any possible
combination of the Scanning functions, in a memory key which you can name. This feature is
useful when you want to store the settings used frequently.
NOTE
•
The scanning modes in memory are not erased even when you turn the machine's power off.
•
The scanning modes you can store in a memory key are: Document Name, Image Quality,
Document Size Select, Scanning Exposure, Copy Ratio, 2-sided Original, Two-page Separation,
Booklet Scanning, Frame Erase, Image Combination, Different Size Originals, Job Build, Nega/
Posi, and Sharpness.
Storing Scanning Modes
1
Select the desired mail box number to display the Document
selection screen, and press "Scan."
When you select a mail box set with a password, enter the password after selecting the
mail box, and press "OK."
The Scanning screen is displayed.
2
Set the scan settings that you want to store, in either the Scan
screen or Special Features screen.
NOTE
•
In the case shown above, the Two-page Separation and Job Build modes are set.
Storing/Recalling Scanning Modes (Mode Memory)
(Mode Memory)
2
2-51