3
Check the prints, and press "Start Print," "Cancel," or "Change
Settings."
To print the remaining sets, press "Start Print."
To cancel printing, press "Cancel."
To change print settings, press "Change Settings"→ press "Change P Settings" → change
the desired settings → press "Done."
- To change the number of copies, use
- To select the print paper, press "Paper Select." (See 'Selecting the Print Paper Size
(Paper Select),' on p. 3-2.)
- To collate the prints, press "Finisher." (See 'Collating Prints (Finisher),' on p. 3-5.)
- To make two-sided prints, press "Two-sided Printing." (See 'Printing on Two Sides (Two-
sided Printing),' on p. 3-16.)
- To make a Booklet, press "Special Features" → press "Booklet." (See 'Making Prints for
Use as a Booklet (Booklet),' on p. 3-22.)
- To select Mode Memory, press "Special Features" → "Mode Memory." (See 'Storing/
Recalling Printing Modes (Mode Memory),' on p. 3-25.)
NOTE
•
To cancel all settings at once, press "Initial Settings." (The machine returns to the standard
mode of Local Printing.)
•
When you have made a sample print without changing the print settings, press "Change P
Settings," and reset the mode.
Checking the Print Result or the Image of the Stored Document (Sample Print)
(numeric keys).
-
3
3-37