Canon imageRUNNER 3300 series Function Manual page 107

3
Select the desired Cover/Job Separator feature, and press "Next."
NOTE
•
You cannot print on the front cover, back cover, or job separator sheets.
•
You can cancel a mode by pressing the mode key again.
4
Select the paper source for each insertion sheet
press "Done."
The selected mode is set and the display returns to the Change Print Settings screen.
IMPORTANT
•
Select the same paper size for the front and back covers and the job separator sheets.
•
When a paper size is changed into another size, the other two will be changed
automatically. But when only the cassette is changed, the other two sizes will not be
changed, as long as the cassettes contain the same size paper.
NOTE
•
The display will vary, depending on the mode selected.
5
Press "Start Print."
The machine starts printing. (See 'Printing Documents Stored in the Mail Box,' on p. 1-13.)
If there is a current job or reserved job, the machine starts printing after that job is
completed.
Printing a Document in a Mail Box After Changing the Settings
press "OK"
→ →
3-21
3