Pace VPN-Lite User Manual page 6

Click on Enabled, to enable the VPN Lite functionality.
By using the information retrieved from the Telkom VPN-Lite setup website (see page 4) enter your
site username, site password and site LAN IP range using the IP slash notation as it appears on the
Telkom VPN-Lite website.
The Static Routes for VPN-Lite will be created automatically.
Click "OK" to save the settings.
TELKOM VPN-Lite 2.5 ver.100712
After you click the "OK" button, the router's LAN IP
o
address will change and you will be required to log in
using the new LAN IP address (as defined in the set up).
e.g. LAN IP = 10.0.16.2
Page 6