Before You Start - Pace VPN-Lite User Manual

Before you start

Register VPN-Lite service.
To enable you to configure the Telkom VPN-Lite service on your Pace Router you first need to
register for the VPN-Lite service on the Telkom website (www.telkom.co.za).
On the VPN-Lite registration site you will be able to configure and manage your VPN-Lite sites as
shown in the image below.
Here you will retrieve vital information like site Usernames and LAN Subnets and Site Password to
configure the VPN-Lite sites. In the below setup sections you will be required to enter these values.
Please ensure that you have all the correct information for each site before you start any of the setup
sections mentioned in this document. Below is an image to show you what information on the VPN-
Lite setup site needs to be retrieved to enable you to setup you VPN-Lite. You can find this screen in
the Manage Sites section.
TELKOM VPN-Lite 2.5 ver.100712
o
This manual assumes that the Pace 921VNX is in its
factory default state. Thus:
LAN IP
o
It is recommended to use the utility to setup VPN-Lite
on your Pace 921VNX. The routers graphical user
interface or manual setup method is to be used by
experienced users only.
o
Please ensure that your PC is set to obtain an IP
address automatically from the router's DHCP server.
= 10.0.0.2
Page 4