Station Mode; Launching The Softap; Figure 67: Launching; Software Access Point Icon; Figure 68: Launching; Software Access Point Icon Menu - HP Wireless LAN 802.11b/g Device WN4201B User Manual

Note that if Station Mode settings were applied in Windows® XP Wireless Zero Configuration
those settings are still in effect while functioning in Station Mode after Access Point Mode has
been activated.

9.1 Launching the SoftAP™

There are two ways to launch the Software Access Point: Through the SoftAP™ icon in the
system tray of your desktop or through the SoftAP™ icon menu. Either method will bring up the
Wireless SoftAP™ dialog box.
To launch the Software Access Point by using the icon in the System Tray simply left click the icon
once.

Figure 67: Launching; Software Access Point icon

OR
It is possible to launch the SoftAP™ with a right click on the SoftAP™ icon. When a right click is
made on the icon the SoftAP™ icon menu appears. Select Show from this menu to bring up the
Wireless SoftAP™ dialog box.

Figure 68: Launching; Software Access Point icon menu

The Wireless SoftAP™ dialog box appears as shown in figure 69.
Wireless LAN 802.11b/g Device

9 Station Mode

Software Access Point
System Tray icon.
68