Figure 43: Change Password Dialog Box - HP Wireless LAN 802.11b/g Device WN4201B User Manual

Figure 43: Change Password dialog box

In order to set an Admin Password:
1. Leave the space for Current Password empty if you have not already set an admin
password.
The Admin Password must be 8 – 16 alphanumeric characters.
Note:
2. Enter the desired password into the space for New Password.
3. Enter the desired password a second time into the space for Confirm New Password.
4. Select OK.
The Admin Password dialog box will disappear.
5. Exit the Wireless SoftAP™ application (See section 8.2.1.2)
6. Re-start your HP PC. (This is necessary for the admin password to take effect.)
The admin password will not effect Station Mode as Options is not an available menu
Note:
selection while running in Station Mode.
Wireless LAN 802.11b/g Device
48