The most recent Station Mode settings entered either in Windows® XP Wireless Zero
Configuration or in Chapter 9, Station Mode, will be enabled. If you have not entered settings
for Station Mode, refer to Chapter 3.
8.2.2.2 Disable / Enable Wireless
Figure 39: Wireless SoftAP™ dialog box. Tools menu
From the Tools menu it is possible to disable the Wireless SoftAP™ by selecting Disable Wireless
(See figure 39). Once disabled the Wireless SoftAP™ dialog box will display "AP mode –
Adapter Disabled" under Status as shown in figure 40 below.
Figure 40: Wireless SoftAP™ dialog box; Wireless Disabled
When wireless is disabled on your HP PC wireless connections will not be functioning nor
Note:
can they be established. Wireless must be enabled again in order to connect with other
wireless devices or to re-establish pre-set wireless connections.
Wireless LAN 802.11b/g Device
Important
45