KitchenAid KEMI301G Use And Care Manual page 37

Setting your oven for the
Sabbath
If you want to set your oven to meet "no
work" requirements for the Sabbath, follow
these steps:
1. Press BAKE.
BAKE
2. Press Number Pads to set the
temperature you want.
Example for 325°F:
3 2
CONTROL
LOCK
3. Press START.
START
4. Press and hold Number Pad 6
for 5 seconds to go into
6
the Sabbath mode.
NOTE: The Sabbath mode is only available
with the Bake function. Before going into the
Sabbath mode make sure the timer is off.
Also, make sure you are in an untimed Bake
mode with no cook time or stop time specified.
What your oven will/will not do
while in the Sabbath mode:
• The oven will not shut off automatically.
• The temperature display of the lower
oven will show "Sab."
• To prevent accidental key pad presses,
only the 0 to 9 and Start key pads will
work.
• No tones will sound.
• No error messages or temperature
changes will be displayed.
• The ON indicator remains lighted.
• Heating element icons flash before oven
heating elements turn on or turn off.
• With the oven door closed, heating ele-
ment icons light when the oven is heating
and go off when the oven stops heating.
NOTE: If you open the oven door when the
elements are off, the elements will not turn on.
U
Elements will not turn on immediately after the
door is closed. If you open the oven door
when the elements are on, the elements will
turn off after a delay. Again, elements will not
turn on immediately after the door is closed.
To change the temperature during
the Sabbath mode for holidays:
1. Press a Number Pad for the
5
2. Press and hold START for 1
NOTES:
• It may take the oven up to one half hour
• Changing the temperature will not turn
To end the Sabbath mode and turn
off oven:
• Press and hold Number Pad 6 for
If a power failure occurs during
the Sabbath mode:
The oven will automatically return to the
Sabbath mode at the desired temperature
when power returns.
sing Your Electric Oven
desired temperature. Each
Number Pad is programmed for
a specific set temperature:
NUMBER PAD
1
2
3
4
5
6
7
8
9
second.
START
to reach the desired temperature.
the heating elements on or off immediately.
Also, the display will not show the tempera-
ture change immediately.
5 seconds.
6
SET
TEMPERATURE
170°F
200°F
250°F
300°F
325°F
350°F
375°F
400°F
475°F
37