Motion Detection - Samsung SNF-7010 User Manual

motion detection

Events of motion detection can be set to trigger event signal output.
1. From the Setup menu, select the
<event ( )> tab.
2. Click <event setup >.
3. Select <motion detection> from
<event action setup>.
4. Set whether or not to <enable>.
5. Set <Sensitivity>, <Size> and <area>.
6. Set whether to use <Detection result
overlay>.
When a motion is detected, its size and
position is marked with a rectangle on
the screen.
• Green : All targets detected as
moving.
7. Specify the activation time and
activation condition.
For more information about <Activation
`
time> and <Action>, refer to "Tampering
detection". (page 82)
8. When done, click [apply ( )].
English _83