Network Setup - Samsung SNF-7010 User Manual

networK Setup

interface
1. From the Setup menu, select the
<network (
2. Click <interface>.
3. Set the <interface> and <ipv6 setup>
as necessary.
• IP type : Select an IP connection type.
- Manual : Specify the IP address,
Subnet mask, Gateway, DNS1,
and DNS2.
- DHCP : IP address, gateway
and subnet mask will be set
automatically while DNS1 and DNS2 are both manually set.
- PPPoE : IP address, gateway and subnet mask will be set automatically while
DNS1, DNS2, ID and Password are set manually.
If you set it to <Manual>, you should specify the IP, Subnet mask, Gateway, DNS 1 & 2 manually.
`
• MAC address : Shows the MAC address.
• IP address : Displays the current IP address.
• Subnet mask : Displays the <Subnet mask> for the set IP.
• Gateway : Displays the <Gateway> for the set IP.
• DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.
4. Set the <ipv6 setup>.
Set to <Use> to use IPv6 address.
`
• Default : Use the default IPv6 address.
• DHCP : Display and use the IPv6 address obtained from the DHCP server.
• Manual : Enter IP address and gateway manually and use it.
5. When done, click [apply (
The IP addressing system will be defaulted to DHCP. If no DHCP server is found, the previous
`
J
settings will be restored automatically.
Once completed with editing, click [Apply (
`
After a while, connect again with the changed IP.
)> tab.
)].
)] to apply changes and the browser exits.
English _67