Table of Contents
Advertisement
(4)
Actuator
The actuator, which uses a rotary voice coil motor (VCM), consumes little power and generates
little heat. The head assembly at the end of the actuator arm is controlled and positioned via
feedback of servo information in the data.
The actuator positions heads on the CCS zone over the disk and is locked by the mechanical lock
when the power is off or the spindle motor is stopped.
(5)
Air circulation (recirculation filter, breather filter)
The heads, disks, and actuator are hermetically sealed inside a disk enclosure (DE) to keep out
dust and other pollutants.
movement of the rotating disks, air is continuously cycled through a filter. This filter will trap
any dust generated inside the enclosure and keep the air inside the DE contaminant free. To
prevent negative pressure in the vicinity of the spindle when the disks begin rotating, a breather
filter is attached. The breather filter also equalizes the internal air pressure with the atmospheric
pressure due to surrounding temperature changes.
(6)
Read/write circuit
The read/write circuit uses head LSI chips and extended partial response class 4 maximum
likelihood (EPR4ML) modulator and demodulator circuit to prevent errors caused by external
noise, thus improving data reliability.
(7)
Controller circuit
The controller circuit uses LSIs to increase the reliability and uses a high speed microprocessing
unit (MPU) to increase the performance of the SCSI controller.
The DE has a closed-loop air recirculation system.
C141-E078-02EN
Using the
1 - 7
Advertisement
Table of Contents
