Detailed Status Display - Lincoln Electric POWER WAVE MANAGER IM8002 Operator's Manual

System Status Tab

Detailed Status Display

If you see error icons and need to look into the problems further, you can select Detailed status from the
Display drop-down and view additional information for each component connected to the Welding Power
Source. In Figure 5.3, all components are ready to weld, except two (the Weld Controller and the User
Interface). Click the arrow (
There are two types of error logs: a Fatal Error Log and an Event Log. These are historical histories for the
component and could include log entries from a previous issue. When you expand the component
displaying the Error icon (
event (Figure 5.3). These log entries can provide additional information to help you find the cause of any
problems.
NOTE |
IM8002
) in front of each component to review the details if there are any available.
Figure 5.3
), Power Wave® Manager displays the number and description of the error or
An event does not always indicate a malfunction. An event
can be posted as an informational entry. Even components
that are ready to weld may have events recorded in their
log.
Power Wave® Manager User Manual
Detailed Status
Chapter 5. System Status
5.3