Viewing the Calculated Limits for a Weld
Viewing the Calculated Limits for a Weld
If there are welds trained for a Weld Profile, you will see an arrow icon ( ) next to the Weld Profile in the
Training section. Click the icon to expand the Weld Profile. This displays the welds that were trained.
To view the limits calculated for the Weld Profile, simply click the Weld Profile number to select it. Power
Wave® Manager displays the limits under the graphs (Figure 11.2). If you would like to see the limits
recorded for each trained weld for that profile, simply click the weld to select it. Power Wave® Manager
also displays these limits under the graphs.
IM8002
Figure 11.2 Welds Trained for a Weld Profile
Power Wave® Manager User Manual
Chapter 11. Training
11.7