Altimeter Settings - Garmin Montana 600 Owner's Manual

Customizing Your Device
• Display—sets the type of
directional heading on the compass.
• North Reference—sets the north
reference of the compass.
• Go To Line/Pointer—allows you
to select how the course appears.
◦ Bearing (Small or Large)—the
direction to your destination.
◦ Course (CDI)—your
relationship to a course line
leading to a destination.
• Compass—switches from an
electronic compass to a GPS
compass when you are traveling
at a higher rate of speed for a set
period of time (Auto), or turns the
compass off.
• Calibrate Compass—page

Altimeter Settings

> Setup > Altimeter.
Select
• Auto Calibration—allows the
34
altimeter to self-calibrate each time
you turn the device on.
• Barometer Mode
◦ Variable Elevation—the
◦ Fixed Elevation—the
• Pressure Trending
◦ Save When Power On—
◦ Save Always—records pressure
15.
• Plot Type
◦ Elevation/Time—records
barometer functions while you
are moving.
barometer functions while you
are stationary.
records pressure data only when
the device is turned on. This
can be useful when you are
watching for pressure fronts.
data every 15 minutes, even
when the device is turned off.
elevation changes over a period
of time.
Montana 600 Series Owner's Manual