Changing The Units Of Measure; Time Settings; Position Format Settings; Heading Settings - Garmin Montana 600 Owner's Manual

Changing the Units of
Measure
You can customize units of measure for
distance and speed, elevation, depth,
temperature, and pressure.
1. Select > Setup > Units.
2. Select a measurement type.
3. Select a unit of measure for the
setting.

Time Settings

> Setup > Time.
Select
• Time Format—allows you to
select a 12-hour or a 24-hour
display time.
• Time Zone—allows you to select
the time zone for the device. You
can select Automatic to set the
time zone automatically based on
your GPS position.
Montana 600 Series Owner's Manual

Position Format Settings

NOTE: Do not change the position
format or the map datum coordinate
system unless you are using a map or
chart that specifies a different position
format.
> Setup > Position Format.
Select
• Position Format—sets the position
format in which a given location
reading appears.
• Map Datum—sets the coordinate
system on which the map is
structured.
• Map Spheroid—shows the
coordinate system the device is
using. The default coordinate
system is WGS 84.

Heading Settings

You can customize the compass
settings.
Select > Setup > Heading.
Customizing Your Device
33