Using The Anti-Theft Control Panel; Installing The Anti-Theft Control Panel; Removing The Anti-Theft Control Panel - Radio Shack AM/FM Stereo Cassette Player Owner's Manual

12-2117.fm Page 9 Thursday, February 24, 2000 11:21 AM
ˆ Using the Anti-Theft Control Panel
The stereo's anti-theft control panel
must be in place for the stereo to oper-
ate. When you remove the control panel,
a red indicator flashes on the front of the
stereo and the stereo cannot be used.
INSTALLING THE ANTI-
THEFT CONTROL PANEL
Caution: Avoid pushing on the display
or pressing any buttons while installing
the control panel.
1. Insert the right edge of the faceplate
into the right edge of the recess. Be
sure the tabs in the recess fit into
the slots in the edge of the face-
plate.
2. Gently push the left edge of the
faceplate into the recess until you
hear a click.
Slot
Tab

Using the Anti-Theft Control Panel

REMOVING THE ANTI-
THEFT CONTROL PANEL
1. Press . You hear a click
RELEASE
and the left side of the faceplate
pops out slightly.
RELEASE
Button
2. Pull the faceplate away from the ste-
reo, then store it in the supplied car-
rying case.
9