Disassembly And Assembly - Pride Mobility Travel scooter series Owner's Manual

V I . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
You can disassemble the Travel Scooter into several pieces: the seat, the rear section, the front section, the
basket, the battery pack, and the battery shroud (models 83 and 84 only). See figure 24. No tools are
required to disassemble or assemble your Travel Scooter. Always disassemble or assemble your Travel
Scooter on a level, dry surface with sufficient room for you to work and move around—about 5 feet (1.5
meters) in all directions. Remember that some Travel Scooter components are heavy and you may need
assistance when lifting them.
WARNING! Do not lift weight beyond your physical capability. Ask for assistance when
necessary while disassembling or assembling your Travel Scooter.
IDENTIFICATION KEY
1. Seat
2. Rear Section
3. Front Section
4. Basket
5. Battery Pack
6. Battery Shroud
Figure 24. Disassembled Travel Scooter
Disassembly Procedures - Models 36, 83, and 84
1. Remove the key from the key switch.
2. Lock the tiller in the straight ahead position by pushing the
tiller lock knob in and turning it clockwise 90°. See figure 25.
The front wheel must face forward in order to lock the tiller.
3. Remove the seat by lifting it straight up and off of the Travel
Scooter. If you encounter resistance when removing the seat,
disengage the seat rotation lever and swivel the seat back and
forth while lifting up on the seat.
4. Remove the rear shroud by lifting it straight up and off of the
Travel Scooter. (Models 83/84 only).
5. Disconnect the battery harness. See figure 16.
6. Disconnect the front-to-rear harness. See figure 16.
7. Disconnect the battery tie-down strap. (Models 83/84 only).
See figure 16.
8. Remove the battery pack from the Travel Scooter by lifting it straight up and off of the Travel Scooter.
Disassembly Procedures - Models 40X, 44X, 40E, 44E, 40LX, 44LX, 53, 53HD, 54, 54HD, 73,
and 74
1. Lock the tiller in the straight ahead position by pushing the tiller lock knob in and turning it clockwise
90°. See figure 25. The front wheel must face forward in order to lock the tiller.
2. Remove the seat by lifting it straight up and off of the Travel Scooter. If you encounter resistance when
removing the seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up
on the seat.
3. Remove the battery pack by lifting the pack straight up and off of the Travel Scooter.
24
1 2
3
4
Figure 25. Tiller Lock Knob
Travel Scooter Series
5a
5b
6
5c