NETGEAR Nighthawk EX7000 User Manual page 45

To use the Reset button to return the extender to factory default settings:

CAUTION:
This process erases any settings that you configured in the extender.
1. Insert a straightened paper clip into the hole of the Reset button and hold it for about
seven seconds.
Reset button
2. Release the button.
CAUTION:
Do not try to go online, turn off the extender, shut down the computer, or
do anything else to the extender until it finishes restarting!
The extender resets and restarts. This process takes about one minute.
To log in to the extender and reset the extender's to factory settings:

CAUTION:
This process erases any settings that you configured in the extender.
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your email address and password.
AC1900 WiFi Range Extender
Maintain and Monitor the Extender
45