Use Wps With The Push Button Method; Use Wps With The Pin Method - NETGEAR Nighthawk EX7000 User Manual

Use WPS with the Push Button Method

To use the Push Button method to connect a WiFi device to the extender's WiFi network, the
WiFi device that you are trying to connect must have a physical push button or a software
push button.
To use WPS to add a computer or WiFi device to the extender's WiFi network:

1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your email address and password.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > Do More > Connect Devices (WPS).
6. Leave the Push Button (recommended) radio button selected.
7. Click the WIFI PROTECTED SETUP (WPS) button.
Both Link Rate LEDs
minutes.
For two minutes, the extender attempts to add the computer or WiFi device to its WiFi
network.
8. Within two minutes, go to the computer WiFi device and press or click its WPS button.
9. To verify that the WiFi device is connected to the extender's WiFi network, select
Settings > Connected Devices.
The WiFi device displays onscreen.

Use WPS with the PIN Method

To use the PIN method to connect a WiFi device to the extender's WiFi network, you must
know the PIN of the WiFi device that you are trying to connect.
AC1900 WiFi Range Extender
.
and the Device to Extender LED
Extender Network Settings
33
blink green for two