How To Use Your Unit - Stanley N128677 Instruction Manual

HOW TO USE YOUR UNIT

How to use High Flow Inflator/Deflator
Adapter Body
1. Choose nozzle to be used to
inflate (Fig. 4) or deflate (Fig. 5).
2. The high flow inflate/deflate
adapter body attachment has an
"inflation" outlet and "deflation"
outlet. Attach the nozzle to the
preferred outlet.
3. Insert nozzle into inflatable and
then start inflator, see How to Start
paragraph.
NOTE: If inflatable is not getting firm
enough, place thumb over the "defla-
tion" outlet (Fig. 6) to allow air to go
directly into the inflatable.
Risk of Bursting. DO
NOT over- inflate. Keeping thumb over
"Deflation" outlet could cause inflatable
to overinflate. Use caution when placing
thumb over "Deflation" outlet.
IMPORTANT: While inflating objects the
pressure gauge will not read correctly.
Sometimes the gauge will read very high.
Turn the unit "OFF" and allow the needle
to settle, this will provide an approximate
reading. Stop and check the pressure read-
ing frequently when inflating.
How to Inflate Tires
1. Press female tire chuck onto
valve stem.
Risk of Flying Objects/Bursting Objects. Over inflating tire could cause
the tire to burst or the universal valve adapter to pop off the valve stem and become a
projectile. Use a tire pressure gauge to ensure an accurate tire pressure reading, because
the pressure gauge on the unit is for general reference only.
See How to Start instructions to start inflator.
2.
How to Inflate Sport Balls
Risk of Bursting. Most sports balls with no initial air will fill in less than
10 seconds. Watch sport balls carefully while filling, do not overfill.
1. Insert inflator needle into sport ball to be inflated.
2. Place Auto/Off switch in the "AUTO" position. When sport ball is firm place
Auto/Off switch in the "OFF" position. IMPORTANT: Most sports balls with
no initial air will fill in less than 10 seconds.
NOTE: When the unit has been turned off, it is normal to hear a short hiss of air
being released.
Nozzle attached
to "inflation"
outlet
4
Nozzle attached
to "deflation"
outlet
13 - ENG
6
5