Husqvarna PR 17 Operator's Manual page 23

Maintenance
Checking the transmission oil level
Checking and adjusting the choke wire
Tighten the nuts and screws
Checking and adjusting of throttle wire
Clean the air filter.
Check/adjust cutting height setting
Check/adjust parking brake
Clean the cooling fins on the engine and hydrostatic
2)
transmission
Replace the air filter.
Replace the fuel filter
Replace the spark plug.
Check to see whether the oil
changing in the gear box
Replace the engine oil filter
Replace the suction filter in the hydraulic tank6)
Carry out 300 hour service
1)
First change after 8 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours.
Maintenance and replacement are required more often in dusty conditions.
4)
twice a week. Conducted by authorised service workshop.
21 AWD first change after 50 hours
X = Described in this operator's manual
O = Not described in this operator's manual
WARNING! No service procedures must be
!
conducted on the engine or cutting unit
unless:
The engine is switched off.
The parking brake is applied.
The ignition key is removed.
The cutting unit is disengaged.
The ignition cables are removed from the
plugs.
Maintenance
4,7) 4,7)
or the filter needs
4)
Daily
Weekly
maintenance
maintenance
before starting
3)
If the machine is used daily it should be lubricated
6)
Conducted by authorised service workshop.
At least
Maintenance
once a
3)
interval in hours
year
X
X
X
X X
X X
X X
O
O
X
O
7)
Only PR 17 AWD, PF
O
X
X
X
X
O
2)
– 23
English