Chapter 3. Terminal Menu Operation and Structure
»» Security/Radius Server
The parameters for the radius server are configured in this menu. The
RADIUS server can be used for authenticating a PPP peer (if defined
under Security/Authentication) and for Telnet server sessions.
Radius Server/Primary Server
Write security: 1; Read security: 2
This is the IP address of the first RADIUS server that the Express
L128FP should attempt to communicate with when authenticating a
PPP peer.
Radius Server/Secondary Server
Write security: 1; Read security: 2
This is the IP address of the back-up RADIUS server that the Express
L128FP should attempt to communicate with when the primary serv-
er does not respond.
Radius Server/UDP Port
Write security: 1; Read security: 2
This is the UDP port that the Express L128FP should use when com-
municating with the RADIUS server. The default is 1645, which is the
commonly used port.
Radius Server/Secret
Write security: 0; Read security: 1
The RADIUS server and Express L128FP share this text string, which
is used by the RADIUS sever to authenticate the Express L128FP that
is the RADIUS client. The factory default is not to use a secret.
Radius Server/Retry Count
Write security: 1; Read security: 2
This is the number of times the Express L128FP should send a request
packet to the RADIUS server without a response before giving up. If the
number of attempts to communicate with the primary server is equal to
3-26
Express L128FP User Manual
61202070L4-20