Specification Chart; Overview; Basic Air Compressor Components - Porter-Cable PXCMLC1683066 Instruction Manual

Single stage, belt drive, electric air compressors

Hide thumbs

Table Of Contents

Table of Contents

Available languages

6. Protect the air hose from damage and puncture. Inspect them weekly for weak or worn

spots, and replace if necessary.

7. To reduce the risk of electric shock, do not expose to rain. Store indoors.

CALIFORNIA PROPOSITION 65 WARNING: This product contains chemicals

known to the State of California to cause cancer, birth defects and/or

reproductive harm.

MODEL NO.

PXCMPC1682066

PXCMLC1683066

BASIC AIR COMPRESSOR COMPONENTS

The basic components of the air compressor are the electric motor, pump,

pressure switch and tank (see Fig. 1).

The electric motor (see A) powers the pump. The electric motor is equipped

with an overload protector to help prevent possible motor burnout. If the motor

becomes overheated, the overload protector will shut it down. Should this occur,

allow the motor to cool for 10-15 minutes, then press (never force) the motor

reset switch to restart the motor.

The pump (see B) compresses the air and discharges it into the tank.

The tank (see C) stores the compressed air.

The pressure switch (see D) shuts down the motor

and relieves air pressure in the pump and transfer

tube when the air pressure in the tank reaches the

kick–out pressure. As compressed air is used and the

pressure level in the tank drops to the kick–in pressure,

the pressure switch restarts the motor automatically,

without warning

and the pump

resumes

compressing air.

The air line outlet

(see E). Connect

1/4" NPT air hose

to this outlet.

WARNING