D-Link DIR-514 User Manual page 13

Section 3 - Configuration
Choose this Internet connection if your ISP assigns you a static IP address. After modifying any settings, click Save Settings to save your
changes.
IP Address:
Enter the IP address assigned to your network connection.
Subnet Mask:
Enter the subnet mask.
Default Gateway:
Enter the default gateway.
Primary DNS Server:
Enter the primary DNS server.
Secondary DNS
Enter the secondary DNS server.
Server:
MTU:
You may need to change the Maximum Transmission Unit
(MTU) for optimal performance. The default value is 1500.
MAC Address:
The default MAC Address is set to the Internet port's
physical interface MAC address on the Broadband
Router. It is not recommended that you change the
default MAC address unless required by your ISP.
You can use the Clone Your PC's MAC Address
button to replace the Internet port's MAC address
with the MAC address of your Ethernet card.
D-Link DIR-514 User Manual
Static IP
11