Section 3 - Configuration
To set up your Internet connection manually, click Manual Internet Connection Setup.
Several different Internet Connection types can be selected depending upon the specifications of your Internet Service Provider (ISP). You
can also set up the WAN Failover feature, which allows you to use a 3G connection for your Internet connection if your main connection fails.
My Internet
Connection is:
WAN Failover:
Internet Host:
3G Internet
Connection:
D-Link DIR-514 User Manual
Manual Internet Connection Setup
Internet Connection
Select the Internet Connection type specified
by your Internet Service Provider (ISP). The
corresponding settings will be displayed below.
Please see the following pages for details on how
to configure these different connection types.
When this box is checked, the router will
switch over to a 3G connection if the Internet
Host (specified below) is unreachable.
Enter an IP address for the router to use to check
if it is connected to the Internet. If WAN Failover
is enabled and the IP address cannot be reached,
the router will switch over to a 3G connection.
Configure your 3G connection when
WAN Failover feature is enabled.
10