Table of Contents
Advertisement
Customization menu entries include:
• Reset settings (reset all settings to
the factory defaults)
• Security
• Lighting
• Trip Computer
• Language (English or French)
• Remote Key
When scrolling through the menu, help
screens are available to help you under-
stand the features.
• To view a help screen, select a fea-
ture and wait a few seconds for the
help screen to appear.
Warnings and Messages
The DIC provides a variety of vehicle
warning messages (depending on
optional equipment) if a problem is
sensed in a vehicle system.
• To acknowledge a message and
clear it from the display, press the
(Enter) switch on the steering
wheel. Some urgent messages can-
not be cleared from the DIC display.
If you have a current OnStar subscrip-
tion, and a warning message appears,
you can press the OnStar button and
speak to an OnStar Advisor. In many
vehicles, OnStar Advisors can access
certain diagnostic information and can
tell you how serious the problem is and
what you should do about it.
Note: Your vehicle's warnings and mes-
sages provide critical information that
can prevent damage to your vehicle.
Review your Owner Manual to become
familiar with the information displayed
and the action required.
See Instruments and Controls in your Owner Manual.
SAFETY & SECURITY
Remote Keyless Entry
The functions
of the Remote
Keyless Entry
(RKE) transmit-
ter include:
(Unlock):
Press this
button to unlock
the driver's door
only or all doors.
The unlock function can be customized
using the Driver Information Center.
(Lock): Press this button to lock all
the doors.
(Trunk): Press and hold this
button to unlatch the trunk.
The trunk also can be unlatched by
pressing the trunk release button locat-
ed in the glove box.
Note: An emergency trunk release handle
is located just inside the rear seat pass-
through, which can be used to unlatch the
trunk in case of battery failure.
(Remote Start): Press this button to
start the engine. (See Remote Vehicle
Start.)
(Vehicle Locator/Panic Alarm):
Press and release this red button to
locate the vehicle. The exterior lamps
will flash and the horn will sound.
Press and hold the button to activate the
panic alarm. The turn signals will flash
and the horn will sound. To cancel the
alarm, press the button again or turn the
ignition key to the On position.
5
Advertisement
Table of Contents
