Table of Contents
Advertisement
• Remote Start
• Factory Settings
• Exit Feature Settings
Warnings and Messages
The DIC provides a variety of vehicle
messages (depending on optional equip-
ment) as well as warnings if a problem
is sensed in a vehicle system.
To acknowledge a message and clear it
from the display, press the
button. Some urgent messages cannot
be cleared from the DIC display.
If you have a current OnStar subscrip-
tion and a warning message appears,
you can press the OnStar button and
speak to an OnStar Advisor. In many
vehicles, OnStar Advisors can access
certain diagnostic information and can
tell you how serious the problem is and
what you should do about it.
Note: Your vehicle's warnings and mes-
sages provide critical information that
can prevent damage to your vehicle.
Review your Owner Manual to become
familiar with the information displayed
and the action required.
See Section 3 of your Owner Manual.
SAFETY & SECURITY
Remote Keyless Entry
The Remote
Keyless Entry
(RKE) trans-
mitter includes
the following
functions:
(Set/Reset)
Vehicle Start)
(if equipped): This feature can be used
to start the engine from outside the vehi-
cle. (See Remote Vehicle Start.)
doors are closed to immediately lock all
the doors. RKE feedback (light flash
and/or horn chirp) can be programmed
using the DIC.
the driver's door. Press it again within
five seconds to unlock all remaining
doors. RKE feedback and the approach
lighting can be programmed using the
DIC.
button to sound the alarm. The horn will
sound and the headlamps will flash for
two minutes. Press the button again or
turn the ignition key to the Run position
to cancel the alarm. The vehicle must be
turned off to use the alarm.
See Section 2 of your Owner Manual.
(Remote
(Lock): Press this button when all
(Unlock): Press this button to unlock
(Remote Alarm): Press this
5
Advertisement
Table of Contents
