About This Guide; Safety Notes; What Is Included - Chauvet COLORado Batten 144 Tour Quick Reference Manual

COLORado™ Batten 144 Tour QRG
About this
Guide
Disclaimer

Safety Notes

What is
Included
The COLORado™ Batten 144 Tour Quick Reference Guide (QRG) only
contains the product's connection and mounting information as well as the
menu options and the DMX values.
•
This Quick Reference Guide DOES NOT replace the product's user
manual, which you can download from the CHAUVET® Web site
(www.chauvetlighting.com).
•
You must read ALL the disclaimers and safety notes in this document as
well as those in the product's user manual before installing, operating, or
maintaining this product.
•
DO NOT open this fixture unless instructed. It contains no user
serviceable parts.
•
DO NOT look at the light source when this fixture is on.
•
DO NOT touch the fixture when it is operating because it could be hot.
•
DO NOT cover the ventilation slots when the fixture is operating to
avoid internal overheating.
•
DO NOT install or operate this fixture where there is less than 50 cm to
the nearest surface to allow adequate ventilation around it.
•
DO NOT leave any flammable material within 50 cm from this fixture
while operating or connected to the power outlet to minimize the risk of
fire.
•
DO NOT mount this fixture overhead without using a safety cable.
•
DO NOT operate this fixture outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
•
DO NOT operate this fixture if you see damage on the housing, lenses,
or cables. In any of these cases, have the damaged parts replaced by an
authorized technician at once.
•
DO NOT connect this fixture to a dimmer or rheostat.
•
ONLY connect this fixture to a grounded and protected circuit.
•
One COLORado™ Batten 144 Tour
•
One power input cord
•
One glare shield
•
One safety cable
•
One Warranty Card
•
One Quick Reference Guide
Page 2 of 12