1. Interior, light shield on
4. Close up view of cable on electron-
ics module
7. Pointing to locking lever; shipping
nut to the left
10. Do not let optical engine
touch either mirror.
2. Light shield removed
5. First cable removed; ribbon cable
still connected
8. Carefully removing the optical
engine
11. Back of optical engine, loosening
lamp screws.
3. Electronics module on left with con-
necting cables
6. Screwdriver used to open cable
clip an lamp wires.
9. Resting optical engine on edge of
chassis, not edge of small mirror
12. Lamp removed.
51