Connecting To Electrical Supply - A.O. Smith HSE-SDS 6 User Manual

Connecting to Electrical Supply

The power cord and plug are connected with
this water heater. Find a separate socket for
power plug and make sure the socket is in
firm contact with the plug. Ensure that
reliable earthing has been done.
Connect the water heater using independent sockets, do not use any adapters. Use
multimeter to check whether the live line and neutral line are not reverse, to ensure
complete safety.
Before installing the water heater, confirm that the power of water heater matches electric
meter capacity and supply wire.
The water heater should be earthed reliably. It is prohibited to connect the earth wire to
neutral wire or faucet water pipe.
Figure 13
CAUTION
11