Advertisement
TO SKIP BACK TO THE PREVIOUS TRACK ON A DISC
•
Press the Reverse Skip / Search Track button (9). If this button is pressed in the middle
of a track, the CD player will skip back to the beginning of that track. To make it skip back
to the previous track press the Reverse Skip / Search Track button (9) twice.
Continuously pressing the Reverse Skip / Search Track button makes the CD player
skip back through the disc track by track. Once the beginning of the first track is reached,
the CD player will not go back any further.
Notes: Tracks can be selected even when the disc compartment is open. However if a track
number is selected that is not present on the CD, disc play will start from the
beginning of the last track.
MANUAL SEARCH
•
During playback, pressing the Forward or Reverse Skip / Search (8,9) button will cause
the player to scan through the current track. At the end of a track the player will skip to the
next track and continue scanning. At the beginning of a track the player will skip to the
previous track and continue scanning.
•
When the player reaches the end of the final track, or the beginning of the first track, it will
stop scanning.
PROGRAMMED DISC PLAY
It is not possible to enter programs during disc play. Press the Stop button (7) first, then follow
the instructions below.
Press the REPEAT/PROG. button (19). "01" and "PROGRAM" will blink on the LCD
display.
Press the Forward and Reverse Skip Track buttons (8,9) to select the track to be stored
in position1.
Press the PROGRAM button (19). The first program selection is now stored in the
program memory 1.
Select the next track to be programmed using the Forward and Reverse Skip Track (8,9)
buttons.
Press the PROGRAM button (19) to store this track.
Continue entering tracks in this way until all the desired tracks are stored (up to a limit of 20).
When the PROGRAM button (19) is pressed to store the 20th track, the display will return
to the 1st program location. Press the PROGRAM button (19) to step through the
program locations.
English
9
Listening to Programmed Tracks
Press the Play Pause button (18). Disc play will start at the beginning of the first programmed track.
To Clear The Program Memory
If the disc is playing, press the Stop button (7) to stop the disc.
Switch the Function (1) selector to a different position (TAPE or RADIO) to clear the Program.
REPEAT DISC PLAY
Use the REPEAT/PROG. button (19) to listen to an entire disc or one track repetitively.
For repeat play of one track
Press the Play/Pause button (18), then press the Repeat button once.
The "REPEAT" indicator will appear in the display.
Select the desired track by pressing the Forward or Reverse Skip Track buttons (8,9). The
selected track will be shown on the CD display.
The selected track will then begin playing through to its end. At which point it will automatically
return to the beginning of that track. This will continue until the Stop button (7) is pressed.
If the REPEAT button (19) is pressed twice more, the Repeat indicator will go off, Repeat play
will end, and normal disc play will resume from that point.
When the selected track has finished playing, the CD play will Stop.
For repeat disc play of all the tracks on the CD
Press the Play/Pause button (18), then press the Repeat button (19) twice.
The "REPEAT ALL" indicator will appear in the display.
The disc will then begin playing through to the end of the last track. At which point it will
automatically return to the beginning of the first track. This will continue until the Stop button
(7) is pressed.
If the REPEAT button (19) is pressed once more, the Repeat indicator will be cancelled, repeat
play will end, and normal disc play will resume from that point.
When the last track has finished playing, the CD player will then Stop.
RANDOM PLAY
Press the RANDOM BUTTON (17). The RANDOM indicator appears in the display. The
random track sequence will begin playback after the current track has ended.
10
English
Advertisement
